If you’re searching for how to clean a green pool fast this post should help! Cleaning a green pool can be a challenging thing to do because this could be caused by weeks or possibly months of pool neglect. Subject to how bad the water is it could be something you can take on yourself, but if you have attempted previously with no results, it might be time to contact pool cleaning experts like Pool Service Gilbert particularly if you live around the Phoenix metro area.
Why is my swimming pool green?
There can be a multitude of reasons for a swimming pool to turn green, a lot of these can be tracked down to improper pH/alkaline levels, presence of metals, growth of algae, failing filtration system, or organic debris in the pool’s water. Some of these are easier to because there are tree branches, leaves, insects, or possibly clouded water floating in the pool. Nevertheless, something such as pH or alkalinity is required to be measured with a testing kit and then adjusted accordingly using chemicals such as chlorine or algaecide.
Cleaning a Green Swimming Pool
In any event the reasoning why your swimming pool water is green or if you’re just wondering how to clean a green pool quickly you need to follow the same steps. Even when you come to the realization that cleaning your green pool is a job left up to the professionals, we follow the same method as the one details in this post, but, in severe circumstances drain the pool and power spray the pool and pool tiled areas until they are clean.
Step 1.) The removal of organic debris
This should be obvious because organic debris such as leaves, branches, insects, and anything else that has fallen into the pool will start to break down and circulate bacteria. By taking out organic debris initially, it will make things easier on the pool’s filtration system and guarantees that any pool chemicals added won’t be hindered by debris in addition to speeding up the breakdown of debris in the pool. This will also provide the additional benefit of stopping or at least decrease the growth of any algae spores presently in the water. Be wary to not disrupt the water too much because this could cause bacteria to circulate.
Step 2.) Assessment of pool water chemistry
Following that, you would want to utilize a pool testing kit to get a benchmark for your pool chemistry such as this one to look for bromine, acid demand, chlorine, pH, and entire alkalinity. When necessary you can take a sample of your pool water and have it tested at your local pool store, but they suggest getting a water sample 12 to 18 inches below the water’s surface and to get a sample in the morning before the sun has a chance burn off the chlorine.
Step 3.) Shock your pool water
To correctly shock a pool, you’ll need to know how to shock a pool properly and what occurs when doing so. Even though it is known as “shocking” a pool, basically you are increasing the chlorine levels of the pool above what common levels should be at. This assists in killing any leftover bacteria in addition to algae that might still leftover following the removal of the organic debris. You should note, this will typically turn the water cloudy, but it should clear up within 24-48 hours. It is recommends shocking a pool at nighttime to bypass UV interference and that pH levels need to be between 7.2 to 7.4 for the ideal results.
Step 4.) Pool filter and vacuum
Following your pool being shocked and the algae dying off because of the shock or the algaecide it’s now the time to filter and vacuum your pool. By vacuuming the pool prior to running the filter you’re making the job smoother on the cartridge, sand, or Diatomaceous Earth filter because when not done correctly you might need to have a professional replace your pool pump. A lot of pool professionals agree to run pool filter for no less than 24 hours continuously and to backwash the filters to stop clogs from entering the filtration system.
Step 5.) Keep up with proper pool maintenance
After all your hard work is done and your pool isn’t green or cloudy anymore it is time to concentrate on a routine daily, weekly, and monthly maintenance regime. Or when you’re new to pool maintenance you can consult this Beginner’s Guide to Swimming Pool Maintenance for additional reading. Make sure you are backwashing your filters routinely in addition to skimming any debris that might have fallen in the pool too.
How to Clean A Green Pool In 24 Hours
Do people to clean their green pools in 24 hours? Yes! Follow the below steps to clear up your green pool in 24 hours:
- Test the pool water
- Balance your chemicals and PH accordingly
- Remove any debris
- Shock the pool
- Brush the pool
- Vacuum the pool
- Run the pump for continually for 24 hours
Green Pool Cleaning In Gilbert, AZ
Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including green pool cleaning, acid washing, repairs, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs!