How To Clean Pool Tile With Vinegar
Written by webtechs

What Size Sand Filter Do I Need?

How To Clean Pool Tile With Vinegar

The size of the sand filter you need for your swimming pool depends on several factors, including the pool’s size, flow rate, and the specific requirements of your filtration system. Sand filters are commonly used for residential pools and are available in various sizes. Here’s how to determine the appropriate size for your pool:

  1. Calculate Pool Gallons: First, you need to calculate the total number of gallons of water in your pool. To do this, measure the pool’s length, width, and average depth (or depth at various points) in feet and use the following formula:

    Pool Gallons = Length (ft) × Width (ft) × Average Depth (ft) × 7.48

    This formula gives you the approximate number of gallons in your pool.

  2. Determine Desired Flow Rate: The flow rate is the rate at which water circulates through the filter. A common guideline is to have a flow rate of 2 gallons per minute (gpm) per 10,000 gallons of pool water. You can calculate the desired flow rate as follows:

    Desired Flow Rate (gpm) = (Pool Gallons / 10,000) × 2 gpm

    This gives you the flow rate required for your pool.

  3. Choose the Right Sand Filter: Sand filters are rated by their flow rate capacity, typically in gallons per minute (gpm). Choose a sand filter that can handle your calculated flow rate. It’s a good idea to select a filter with a slightly higher flow rate capacity to ensure efficient filtration.

  4. Check the Manufacturer’s Recommendations: Always refer to the manufacturer’s specifications and recommendations for the sand filter you are considering. Manufacturers provide guidance on the filter’s maximum flow rate capacity, which should match or exceed your pool’s calculated flow rate.

Keep in mind that sand filters come in various sizes, so you’ll want to choose one that aligns with the size of your pool and the required flow rate. Additionally, consider the quality and durability of the filter, as well as any specific features that may be important to you, such as ease of maintenance.

If your pool has special features like waterfalls, fountains, or a spa, you may need a larger filter or a multi-speed pump to accommodate the additional flow requirements.

Lastly, for the best results and to ensure proper filtration, it’s essential to maintain and backwash your sand filter regularly as recommended by the manufacturer and based on the water quality and usage of your pool. Proper maintenance will help your filter operate efficiently and keep your pool water clean and clear.

Pool Service Gilbert In Arizona

Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including repairs, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs.

More Articles About Pool Care

How To Backwash A DE Filter
Written by webtechs

How To Backwash A DE Filter

How To Backwash A DE Filter

If you are searching for “how to backwash a de filter“, we’re here to provide you with a step-by-step guide. Backwashing a DE (diatomaceous earth) filter means you are reversing water flow in order to clean out any dirt or debris that has accumulated over time.

What Is A DE Filter?

DE is skeletons of fossilized single cell organisms called diatoms. A white powder is added to the filter, creating a DE cake. This latches itself onto the grid inside of the filter. The cake is what is utilized to filter out any fine particles that have entered the area. Typically, DE filters do have a lot of maintenance needs, but they are the most effective filters on the market today.

How To Backwash DE Filter

Follow these steps to backwash your DE filter:

  • Turn the power to the filter system off, then turn the multi-position valve to “backwash” or pull open to twist the pull or push valve on the backwash gate, if necessary.
  • Turn the filter system on and let it run for a good two minutes. This will wash the water out of the backwash port or valve. 
  • Shut the filter system down after a few minutes of running. If you have a multi-position valve, turn it to rinse and let the filter run again for another minute. 
  • Turn the system off one more time and turn the multi-position valve to filter. Then shut the pull or push valve completely.
  • Turn the filter on, adding more DE powder to the skimmer basket. 
  • Make sure you have read/followed the filter instructions before adding the DE powder.

When Should You Backwash A DE Filter?

Once your meter goes up by 9-10 pounds beyond normal starting pressure, it is indeed time to backwash the DE filter. For example, if the starting pressure is 10psi and it now reads 20psi, a backwashing is necessary. It never hurts to backwash the filter early, simply as a preventative measure.

How Often Should You Backwash The Filter?

As mentioned above, your DE pressure gauge will let you know when the time is right for a backwash. The pressure gauge is there to notify you when the pressure is too high. Pressure typically builds up due to dirt and debris collection within the filter. The more debris present, the higher the pressure will go.

How Much DE Should You Add After Backwashing The Filter?

Begin by figuring out the square footage of your filter. This information should be located on the side of the tank. If you cannot find it, search online or contact the manufacturer. DE is generally measured in pounds, so possessing a 1-pound DE scoop is a good idea. If you do not have this scoop, try using a 1-pound coffee can instead.

How To Backwash Hayward DE Filters

Turn the Hayward system off and twist the backwash valve until it is open. Use the bump handle to bump the filter 15 times. Perform this task slowly. Keep the valve open, then turn the system back on and let it run for a couple minutes. Then turn the system off again and repeat the same steps. Finish by turning the system down and closing the valve. Add more DE powder to your skimmer basket and start the system up again.

Pool Filter Service In Gilbert, AZ

Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including repairs, replacement, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs! Call us at 480-748-3022 for more information.

Written by webtechs

5 Common Pool Problems

5 Common Pool Problems

When you are searching for common pool problems and how to fix them when they come up arise, Pool Service Gilbert is here to help! Keep read to find out more about 5 common pool problems and how to fix them.

Algae Growth

A pool in good health should appear as a clear or bluish tone. Yet, we have all noticed pools that appear cloudy and green over time. A pool that turns green has usually been overtaken with hazardous algae. This is one the more common pool problems that homeowners are going to encounter. Typically, algae are going to affect pools with a chlorine level that is lower than recommended.

The Prevention of Algae Growth

  • Call an experienced pool service when you’re not comfortable taking on this task.
  • Following the algae being eliminated, increase the pools chlorine levels.
  • Keep adding chlorine to hinder future algae growth.

Clogged Pool Filters

Your pool circulates its water, and with the circulation it could eventually be disrupted when the pool filter becomes clogged. This can happen if a pool isn’t being regularly maintained. Debris such as dirt, insects and leaves can clog the filter, making it become ineffective. Examine the filter when you happen to see more debris than you typically see in your pool.

Fixing A Clogged Pool Filter

  • Clear out the pool filter and pool.
  • Regularly clear debris from the area to hinder future problems.

Low Or High pH

Safe pH levels for swimming pool water are between 7.2 and 7.6. Any level that is below or above this those can cause irritated eyes, throat, and skin. You can find out your pH level in your pool by testing it regularly. Balance the pH using pool chemicals, when required.

How To Fix pH Levels

  • Regularly test you pools pH level.
  • Balance the pH level with the addition of pool chemicals.

Overabundance of Chlorine

Whereas chlorine is needed to hinder the growth of algae, an overabundance of chlorine can be almost as hazardous as algae. Signs of an overabundance chlorine is going to include having a hard time seeing underwater and/or severe eye irritation.

How To Remedy Chlorine Levels

  • Continually measure your pools chlorine levels using test strips, kits, or readers.

Cloudy Water

Every homeowner wants their pool to be crystal clear, but some notice a blanket of haze is hovering above the pool water. The most common reason for this is probably a bacteria build-up in the pool water. Be sure to test your chlorine levels in these cases. When your chlorine levels are low, bacteria are not going to be eliminated effectively.

How To Fix Cloudy Pool Water

  • Regularly test your pools chlorine levels.
  • Add chemicals, when required.

Pool Pump Replacement In Gilbert, AZ

Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including repairs, replacement, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs! Call us at 480-748-3022 for more information.

How To Clean A Green Pool Fast
Written by webtechs

How to Clean a Green Pool Fast

How To Clean A Green Pool Fast

If you’re searching for how to clean a green pool fast this post should help! Cleaning a green pool can be a challenging thing to do because this could be caused by weeks or possibly months of pool neglect. Subject to how bad the water is it could be something you can take on yourself, but if you have attempted previously with no results, it might be time to contact pool cleaning experts like Pool Service Gilbert particularly if you live around the Phoenix metro area.

Why is my swimming pool green?

There can be a multitude of reasons for a swimming pool to turn green, a lot of these can be tracked down to improper pH/alkaline levels, presence of metals, growth of algae, failing filtration system, or organic debris in the pool’s water. Some of these are easier to because there are tree branches, leaves, insects, or possibly clouded water floating in the pool. Nevertheless, something such as pH or alkalinity is required to be measured with a testing kit and then adjusted accordingly using chemicals such as chlorine or algaecide.

Cleaning a Green Swimming Pool

In any event the reasoning why your swimming pool water is green or if you’re just wondering how to clean a green pool quickly you need to follow the same steps. Even when you come to the realization that cleaning your green pool is a job left up to the professionals, we follow the same method as the one details in this post, but, in severe circumstances drain the pool and power spray the pool and pool tiled areas until they are clean.

Step 1.) The removal of organic debris

This should be obvious because organic debris such as leaves, branches, insects, and anything else that has fallen into the pool will start to break down and circulate bacteria. By taking out organic debris initially, it will make things easier on the pool’s filtration system and guarantees that any pool chemicals added won’t be hindered by debris in addition to speeding up the breakdown of debris in the pool. This will also provide the additional benefit of stopping or at least decrease the growth of any algae spores presently in the water. Be wary to not disrupt the water too much because this could cause bacteria to circulate.

Step 2.) Assessment of pool water chemistry

Following that, you would want to utilize a pool testing kit to get a benchmark for your pool chemistry such as this one to look for bromine, acid demand, chlorine, pH, and entire alkalinity. When necessary you can take a sample of your pool water and have it tested at your local pool store, but they suggest getting a water sample 12 to 18 inches below the water’s surface and to get a sample in the morning before the sun has a chance burn off the chlorine.

Step 3.) Shock your pool water

To correctly shock a pool, you’ll need to know how to shock a pool properly and what occurs when doing so. Even though it is known as “shocking” a pool, basically you are increasing the chlorine levels of the pool above what common levels should be at. This assists in killing any leftover bacteria in addition to algae that might still leftover following the removal of the organic debris. You should note, this will typically turn the water cloudy, but it should clear up within 24-48 hours. It is recommends shocking a pool at nighttime to bypass UV interference and that pH levels need to be between 7.2 to 7.4 for the ideal results.

Step 4.) Pool filter and vacuum

Following your pool being shocked and the algae dying off because of the shock or the algaecide it’s now the time to filter and vacuum your pool. By vacuuming the pool prior to running the filter you’re making the job smoother on the cartridge, sand, or Diatomaceous Earth filter because when not done correctly you might need to have a professional replace your pool pump. A lot of pool professionals agree to run pool filter for no less than 24 hours continuously and to backwash the filters to stop clogs from entering the filtration system.

Step 5.) Keep up with proper pool maintenance

After all your hard work is done and your pool isn’t green or cloudy anymore it is time to concentrate on a routine daily, weekly, and monthly maintenance regime. Or when you’re new to pool maintenance you can consult this Beginner’s Guide to Swimming Pool Maintenance for additional reading. Make sure you are backwashing your filters routinely in addition to skimming any debris that might have fallen in the pool too.

How to Clean A Green Pool In 24 Hours

Do people to clean their green pools in 24 hours? Yes! Follow the below steps to clear up your green pool in 24 hours:

  • Test the pool water
  • Balance your chemicals and PH accordingly
  • Remove any debris
  • Shock the pool
  • Brush the pool
  • Vacuum the pool
  • Run the pump for continually for 24 hours

Green Pool Cleaning In Gilbert, AZ

Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including green pool cleaning, acid washing, repairs, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs!

More Articles About Pool Care

What-Size-Sand-Filter-Do-I-Need-For-My-Above-Ground-Pool
Written by Brian B

What Size Sand Filter Do I Need For My Above Ground Pool?

What-Size-Sand-Filter-Do-I-Need-For-My-Above-Ground-Pool

If you are searching for “what size sand filter do I need for my above ground pool,” then this post is for you! The size of the sand filter is very much dependent on pool size and shape. Let’s take a look at how one should go about choosing and cleaning a filter.

What is the Correct Size Pool Filter for My Above Ground Pool?

When deciding on a pool filter for your above ground pool swimming pool, a useful tip is to pick one that is at least 1 sq. ft. for a 10,000-gallon pool capacity.

For instance, a 16” sand filtered system has a 1.55″ sq. ft filtered area, making it ideal for a 15,000- gallon pool.

What Are Recommended Pool Pump Sized For My Above Ground Swimming Pool?

Round above ground swimming pools:

  • Swimming pools up to 24 ft. around, a 1 horsepower pool pump is needed.
  • Swimming pools over 24 ft. around, a 1.5 horsepower pool pump is needed.

Oval above ground swimming pools:

  • Oval swimming pools up to 15 × 30 ft., a 1 horsepower pool pump is needed.
  • Oval swimming pools over 15 × 30 ft., a 1.5 horsepower pool pump is needed.

Cleaning Your Sand Filter

1. Preparing to Backwash

  • Check your pressure gauges.
  • Turn off the pump (and circuit breaker switched off.
  • Change the setting on your pool filter valve.
  • Position your waste hose.

2. Backwashing the Filter

  • Run the pump for two minutes.
  • Watch the sight glass.
  • Turn the pump back off.

3. Performing a Final Rinse

  • Switch to the “rinse” setting.
  • Return to the “filter” setting.
  • Check your gauges again.

Pool Service Gilbert

Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including filter cleaning, repairs, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs! Call us at 480-748-3022.

More Articles About Pool Care