How To Clean Pool Tile With Vinegar
Written by webtechs

What Size Sand Filter Do I Need?

How To Clean Pool Tile With Vinegar

The size of the sand filter you need for your swimming pool depends on several factors, including the pool’s size, flow rate, and the specific requirements of your filtration system. Sand filters are commonly used for residential pools and are available in various sizes. Here’s how to determine the appropriate size for your pool:

  1. Calculate Pool Gallons: First, you need to calculate the total number of gallons of water in your pool. To do this, measure the pool’s length, width, and average depth (or depth at various points) in feet and use the following formula:

    Pool Gallons = Length (ft) × Width (ft) × Average Depth (ft) × 7.48

    This formula gives you the approximate number of gallons in your pool.

  2. Determine Desired Flow Rate: The flow rate is the rate at which water circulates through the filter. A common guideline is to have a flow rate of 2 gallons per minute (gpm) per 10,000 gallons of pool water. You can calculate the desired flow rate as follows:

    Desired Flow Rate (gpm) = (Pool Gallons / 10,000) × 2 gpm

    This gives you the flow rate required for your pool.

  3. Choose the Right Sand Filter: Sand filters are rated by their flow rate capacity, typically in gallons per minute (gpm). Choose a sand filter that can handle your calculated flow rate. It’s a good idea to select a filter with a slightly higher flow rate capacity to ensure efficient filtration.

  4. Check the Manufacturer’s Recommendations: Always refer to the manufacturer’s specifications and recommendations for the sand filter you are considering. Manufacturers provide guidance on the filter’s maximum flow rate capacity, which should match or exceed your pool’s calculated flow rate.

Keep in mind that sand filters come in various sizes, so you’ll want to choose one that aligns with the size of your pool and the required flow rate. Additionally, consider the quality and durability of the filter, as well as any specific features that may be important to you, such as ease of maintenance.

If your pool has special features like waterfalls, fountains, or a spa, you may need a larger filter or a multi-speed pump to accommodate the additional flow requirements.

Lastly, for the best results and to ensure proper filtration, it’s essential to maintain and backwash your sand filter regularly as recommended by the manufacturer and based on the water quality and usage of your pool. Proper maintenance will help your filter operate efficiently and keep your pool water clean and clear.

Pool Service Gilbert In Arizona

Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including repairs, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs.

More Articles About Pool Care

Written by webtechs

Acid Wash Pool Costs 2023

Acid washing a swimming pool typically costs between $525 and $1,775 on average, or $0.53 per square foot in the United States in 2023.

The cost of an acid wash for a swimming pool can vary widely depending on several factors, including the size of the pool, the extent of staining or discoloration, the geographic location, and the specific services offered by the pool maintenance or cleaning company. Here are some cost-related considerations for an acid pool wash:

  1. Size of the Pool: The primary factor that influences the cost of an acid wash is the size of the pool. Larger pools will typically require more acid and more labor, which can drive up the cost. Pool professionals often charge per square foot or per linear foot of the pool’s surface area.

  2. Severity of Staining: If your pool has heavy staining, algae growth, or other stubborn discolorations, it may require more extensive and time-consuming acid washing. This can increase the cost compared to a simple surface clean.

  3. Geographic Location: The cost of services, including acid pool washing, can vary significantly depending on your location. In areas with a high cost of living or where specialized services are in high demand, you can expect higher prices.

  4. Additional Services: Some pool maintenance companies may include acid washing as part of a comprehensive pool cleaning and maintenance package, while others may charge separately for this service. The overall cost can depend on what other services are included.

  5. Preparation and Cleanup: The process of acid washing involves draining the pool, applying the acid solution, scrubbing, and then neutralizing and disposing of the acid. The cost may include these preparation and cleanup steps.

  6. Repairs and Replastering: In some cases, acid washing can reveal the need for pool repairs or even re-plastering. These additional services will increase the overall cost.

  7. Frequency: Acid washing is not typically done as part of regular pool maintenance and is usually reserved for more severe cases of staining and discoloration. The frequency with which you require acid washing will affect the overall cost.

How Much Does A Pool Cleaning Service Cost?

The average pool service costs in the Phoenix, AZ area range from $85 to $125 per month. Typically, any pool owner can expect to pay around $105 per month for cleaning services. Use this post to help determine a budget for any upcoming pool services you may need in the future.

How Much Does Pool Service Cost in Phoenix Arizona

Pool Service Phoenix

Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including repairs, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs.

More Articles About Pool Care

Average Pool Volume
Written by webtechs

Average Pool Size Phoenix

Common Pool Problems

The average pool volume can vary widely depending on the size and type of pool. Residential swimming pools come in various shapes and sizes, and their volume is typically measured in gallons or cubic meters. Here are some general guidelines for different types of residential pools:

  1. Small Above-Ground Pools: These pools are typically the smallest and can hold anywhere from 1,000 to 5,000 gallons (3,785 to 18,927 liters) of water. The volume depends on the pool’s dimensions and depth.
  2. Medium-Sized In-Ground Pools: A medium-sized in-ground pool, commonly found in residential settings, can have a volume of 10,000 to 20,000 gallons (37,854 to 75,708 liters). The exact volume depends on the pool’s shape, dimensions, and depth.
  3. Large In-Ground Pools: Larger in-ground pools, often found in larger properties or luxury homes, can hold 25,000 gallons (94,635 liters) or more. Some exceptionally large pools can exceed 50,000 gallons (189,270 liters).

It’s important to note that these are general guidelines, and the actual volume of a pool can vary based on its specific dimensions and depth. To calculate the exact volume of a pool, you can use the following formula:

Volume (in gallons) = Length (in feet) × Width (in feet) × Average Depth (in feet) × 7.48052

Or, if you prefer to use meters:

Volume (in cubic meters) = Length (in meters) × Width (in meters) × Average Depth (in meters)

Remember that the average depth is used in these calculations because most residential pools have a sloped floor, with the deepest part typically in the center. To get an accurate measurement, measure the depth at several points and calculate the average.

If you’re unsure about the volume of your pool or need precise measurements for maintenance or chemical treatments, it’s a good idea to consult with a professional pool technician or use a pool volume calculator designed for this purpose.

Pool Service Gilbert

Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including cleaning, replacement, repairs, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs!

More Articles About Pool Care

Common Pool Problems
Written by webtechs

Common Pool Problems

Common Pool Problems

There are approximately 10.4 million residential pools in the US. Whereas swimming pools are ideal for hot summer days and backyard parties, however, they also come with some undesirable headaches. It’s essential to realize common pool issues that every pool owner will face. By recognizing what to look for and how you can care for your pool correctly, you will have an immaculate swimming pool that can be appreciated all year. Here are some common pool issues you should know about, and what to do about them.

The Growing of Algae

A pool in good health should have a clear/bluish hue. But we have all seen pools that look murky, green, and totally un-swimmable. Pools that are green in color are most likely overrun with dangerous algae, which is the most typical pool issue that homeowners face. Algae usually infects pools that have chlorine levels that are too low. If your pool is starting to turn green, it’s wise to hire a professional pool maintenance company to eliminate the algae. After that, you should boost the amount of chlorine you put in your pool for the prevention of future algae infection.

Excessive Chlorine

Whereas chlorine is perfect for keeping algae from growing in your pool, excessive chlorine could be just as troublesome as algae. When you get intense eye irritation or find it hard to see underwater, you might have excessive chlorine levels in your pool. The best way to know how much chlorine your pool has is by measuring it with test kits, strips and readers making sure those levels stay unchanging.

Clogged Pool Filter

The pool circulates pool water, and that circulation could be interrupted if the pool filter gets clogged. Pool filters get clogged when the pool isn’t cleaned routinely. Debris such as dirt, tree leaves, insects, and can clog up your pool filter making it inefficient. When you notice the pool has a significant amount of debris than usual, check the filter. If the filter is clogged, just cleanout out the filter and clean the pool. For future prevention of filter clogs, try and clean your pool routinely and clear out any debris.

Substandard Circulation

Substandard circulation could be brought on by clogged pool filters, but also from various other issues you should have knowledge about. When you discover that your pool is not circulating correctly but the filter is clear, you might have a blown fuse or other electrical issue. One other reason the circulation is substandard could be because of a hole in the airline. When your pool airline is leaking because of holes, your pool won’t circulate any longer. Hire a pool repair company right away for repairing any airline or electrical damage that’s hindering pool circulation.

Say Farewell to Swimming Pool Problems!

Do not let your swimming pool become un-swimmable during the hotter months. Take preventive measures and realize when to acknowledge common pool issues.

Pool Service Gilbert

Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including cleaning, replacement, repairs, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs!

More Articles About Pool Care

How To Take Care Of A Saltwater Pool
Written by webtechs

How To Take Care of A Saltwater Pool

How To Take Care Of A Saltwater Pool

Do you wish you had a saltwater pool? Want to discover more concerning how to take care of a saltwater pool? You have come to the right site! Pool Service Gilbert is a trailblazer in saltwater decontamination and a professional in saltwater pool maintenance.

Maintaining a Saltwater Pool

For maintaining a saltwater pool, you should keep the pools pump, filter, and its skimmer clean and in good operating status. With these pools, you are required to go over the salt chlorinator cell and have it replaced when required. Test routinely for correct water chemistry for maintaining clean, clear pool water.

Saltwater Pool Chemistry Tips

Using a saltwater pool strip for testing, test the water for salt, pH levels, free chlorine, complete alkalinity, stabilizer, and complete hardness. Use a water chemistry calculator online for helping make those alterations and balance your pools water. After severe weather or times in which the load is higher, like at pool parties, make sure to test again to keep your pool’s water chemistry within adequate levels. After you testing your pool, balance as necessary.

6 Common Saltwater Pool Care Concerns

  1. What’s are the differences between a saltwater pool and a conventional chlorinated one?

In a conventional pool, chlorine is added straight to the pool’s water. Progressions in the pool industry have led to a more streamlined and safer option. Saltwater chlorination is natural and a more handy sanitization method. Salt gets dissolved in the pool and the system then turns it into the perfect amount of chlorine for clear, clean, and lavishly soft water.

  1. Is a saltwater pool maintained easier?

Absolutely, a saltwater pool is easier to take care of! There’s no need to buy, store and add chlorine to the pool. Just add salt made for pools and the pool’s salt chlorinator is going to take care of creating chlorine. Whereas all pools require chemicals to keep the pool water clean and clear, saltwater pools are more balanced than conventional chlorinated pools, so they need less chemicals.

  1. Is a saltwater pool less costly to maintain?

Absolutely, saltwater pools have a reduced expense of operation in comparison to a conventional chlorinated pool. This cost savings is because the chlorine is created from salt and there is no need to purchase chlorine. In addition, saltwater pools require less chemicals to keep the water clear and clean.

  1. Is a saltwater pool, well, salty?

Not a bit! In fact, your pool’s level of salinity is about 1/12 of the salinity in the ocean and a drop from a saltwater pool has less salt than found in human tears. Additionally, saltwater is soft and feels really nice on your family and guest’s skin!

  1. How much salt does the system require?

Salt Systems work ideally with roughly thirty-two hundred parts per million (ppm) of salt, which is approximately the comparable to a teaspoon of salt per gallon. When salt levels get outside of this range, differing salt systems provide a way (usually an LED light) to signal homeowners to the need to modify their salt level.

  1. What happens if my saltwater pool is cloudy?

Without regard to pool type, cloudy pool water is usually a sign of a chlorine insufficiency or inadequate circulation and filtration. Make sure to identify the issue by first checking your pool’s chemistry and then adjusting the chemistry as required. In saltwater pools, the salt level may be poor or there might be a problem with the pool’s salt chlorinator. Keep the filter of the pool clean and run the system so that all the water is turned over daily.

Pool Service Gilbert In Arizona

Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including repairs, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs.

More Articles About Pool Care

Written by webtechs

What Is an In Floor Pool Cleaning System?

What Is an In Floor Pool Cleaning System?

 

Everybody looks forward to swimming in their pool, but who looks forward to getting it clean? Okay, some of you like cleaning your pool (possibly even you), but a lot of people discover pool cleaning to be monotonous and would opt to have someone or something else clean it for them.

What is an in floor pool cleaning system?

In floor swimming pool cleaning systems utilize pop-up cleaners to clear the pool of grime and debris. They are known as pop-ups since they actually pop out of the pool’s floor for cleaning, and then retract when they are finished. These are usually installed when the pool is being constructed and are put all around the surface of the pool, as well as benches, steps, and pool walls. The average swimming pool might have fifteen or more pop-ups interspersed around in strategic areas. This might seem like a lot of equipment, but you need not be concerned – pop-ups are flush with the pool’s bottom when depressed and not being used, and they won’t prevent swimming or playing.

How do in floor pool cleaning systems work?

Each of the pop-ups have a simple device: it squirts pressured, filtered water in a particular direction for moving the grime and dirt towards the pool’s main drain. The drain then draws in the dirt and grime in which you are able to easily remove it at a later time. Instead of working on their own, pool pop-ups work in groupings for quicker and more efficient cleaning. Grouping sizes usually vary from two to ten pop-ups, with each group responsible of cleaning a particular area of the pool. The groups don’t all work at the same time though, as one might think. They alternate to efficiently move the debris towards the drain area by area, likewise of how you use a broom to sweep all of the debris in a room into a single pile. The pop-ups might move the debris in straightforward from the shallow end to the deep end, or they might take another route, subject to your pool design and the system that your pool uses. The pop-up heads also spin so they can spray water in various directions to get the debris off the pool floor and moving. You also can set the speed in which the groups activate and clean your pool. The time that each area cleans could vary between thirty to sixty seconds, with shorter periods being used for regular clean ups and longer periods being used when the pool is more messy than usual.

Can these systems be used on any inground pool kind?

Absolutely. In-floor cleaning systems can be used with fiberglass, concrete, and vinyl lined pools. The set up may be slightly various for each, so it’s wise to speak with different manufacturers and installers when planning your in ground pool project. Don’t forget that these types of systems cannot easily be incorporated once the pool is completely installed, so it’s important to thoroughly consider if this is a necessity for you while you are still in the early planning stages and purchasing of your swimming pool.

Pool Service Gilbert

Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including repairs, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs.

More Articles About Pool Care

Written by webtechs

5 Common Pool Problems

5 Common Pool Problems

When you are searching for common pool problems and how to fix them when they come up arise, Pool Service Gilbert is here to help! Keep read to find out more about 5 common pool problems and how to fix them.

Algae Growth

A pool in good health should appear as a clear or bluish tone. Yet, we have all noticed pools that appear cloudy and green over time. A pool that turns green has usually been overtaken with hazardous algae. This is one the more common pool problems that homeowners are going to encounter. Typically, algae are going to affect pools with a chlorine level that is lower than recommended.

The Prevention of Algae Growth

  • Call an experienced pool service when you’re not comfortable taking on this task.
  • Following the algae being eliminated, increase the pools chlorine levels.
  • Keep adding chlorine to hinder future algae growth.

Clogged Pool Filters

Your pool circulates its water, and with the circulation it could eventually be disrupted when the pool filter becomes clogged. This can happen if a pool isn’t being regularly maintained. Debris such as dirt, insects and leaves can clog the filter, making it become ineffective. Examine the filter when you happen to see more debris than you typically see in your pool.

Fixing A Clogged Pool Filter

  • Clear out the pool filter and pool.
  • Regularly clear debris from the area to hinder future problems.

Low Or High pH

Safe pH levels for swimming pool water are between 7.2 and 7.6. Any level that is below or above this those can cause irritated eyes, throat, and skin. You can find out your pH level in your pool by testing it regularly. Balance the pH using pool chemicals, when required.

How To Fix pH Levels

  • Regularly test you pools pH level.
  • Balance the pH level with the addition of pool chemicals.

Overabundance of Chlorine

Whereas chlorine is needed to hinder the growth of algae, an overabundance of chlorine can be almost as hazardous as algae. Signs of an overabundance chlorine is going to include having a hard time seeing underwater and/or severe eye irritation.

How To Remedy Chlorine Levels

  • Continually measure your pools chlorine levels using test strips, kits, or readers.

Cloudy Water

Every homeowner wants their pool to be crystal clear, but some notice a blanket of haze is hovering above the pool water. The most common reason for this is probably a bacteria build-up in the pool water. Be sure to test your chlorine levels in these cases. When your chlorine levels are low, bacteria are not going to be eliminated effectively.

How To Fix Cloudy Pool Water

  • Regularly test your pools chlorine levels.
  • Add chemicals, when required.

Pool Pump Replacement In Gilbert, AZ

Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including repairs, replacement, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs! Call us at 480-748-3022 for more information.

Written by webtechs

How Often Should I Drain My Pool?

How often should i drain my pool?

How often should I drain my pool, is a common question asked by pool owners. Draining your swimming pool and replacing its water is a lengthy and daunting process. It could take hours or possibly days, depending on the size of your pool. And throughout that time, the pool is totally out of service. So, choosing to drain your pool is one that should not be made lightly. Not only is there the inconvenience to think about, but also its expense. When you have a home water meter, you can anticipate a high peak on your next bill when you replace all the water. How often and when do you need to drain your pool? The following are a couple of reasons why.

Water Replacement Schedule

The water in residential and commercial swimming pools usually cycles through a filter, cleaned by hand, and treated then balanced using chemicals. Even when heavily used, it is safe to swim in for months or possibly years at a time without the requirement to be replaced in a lot of cases. Aside from emergencies (more information on emergency draining below), residential pools usually only are required to be drained once every 2 to 3 years. Commercial pools, when correctly maintained and kept in good condition, needs to be drained and have its water replaced yearly. Having pools drained and refilled more frequently than that can be expense, laborious, and annoying.

Emergency Draining

There are deviations to these schedules, nevertheless. When there is a spill of unsafe chemicals into the pool’s water — like bleach or ammonia — that can possibly harm people, it’s wise to drain all of the water then refill the pool instead of waiting for the pool’s filter to cycle the pollutants out. Likewise, when human waste in some way finds its way into the pool, it’s usually best to drain it so the pool can be cleaned and sanitized prior to being used by swimmers again. In conclusion, when maintenance or repairs are required to be carried out on your pool, it usually is necessary for the pool to be drained first so service technicians are able get access to the pool equipment or pool areas they need.

Pool Service in Gilbert, Arizona

Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including repairs, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs.

More Articles About Pool Care

Written by Brian B

How To Clean Pool Tile

How To Clean Pool Tile

If you are searching “how to clean pool tile” for your backyard pool, then Pool Service Gilbert is here to help!

Pool Tile Cleaning

Dirty pool tiles covered in calcium will make your pool unsightly. Here are a few of the best cleaning methods to use for your pool tiles:

  • Pressure Washer
  • Vinegar
  • Baking Soda
  • Pumice Stone
  • Tile Grout

How To Clean Pool Tile With A Pressure Washer

You can use a pressure washer to clean your pool tile, but you must make sure you are using the right media to blast away the calcium. First, find out what kind of tile your pool features, then you’ll know what type of media to use for the task. It is possible to crack or even ruin your tiles when using the wrong media. Re-tiling your pool is much more expensive than cleaning with a pressure washer. 

How To Clean Pool Tile Using Vinegar

Using vinegar is a great way to remove any calcium deposits from your tiles. However, the one drawback to using vinegar is this process can take longer than other cleaning methods. Begin the process by heating a towel/rag in the microwave before applying vinegar. Molecules in the vinegar will react with calcium, which slowly separates the deposition of calcium from the pool tiles.

How To Clean Pool Tile With Baking Soda

When using baking soda to create a paste mixing a proper amount of baking soda and water, you can remove stains in your pool. With a sponge or cloth, spread the paste on the pool tiles. Put the mixture in a spray bottle and distribute the mixture this way, if preferred. Then rinse the mixture off the tiles with a clean cloth/sponge and warm water.

How To Clean Pool Tile With Pumice Stone

A pumice stick can work wonders to scrub off the last few bits of calcium in areas that a scraper can’t reach. Always test the pumice on a low key area of the tile first, although it is generally safe to use this for cleaning. 

How To Clean Pool Tile Grout

Mixing baking soda with water will make a paste that can clean your pool tile grout. Get a cloth/sponge wet with warm water and then use the paste for cleaning. If needed, use a toothbrush to get between tiles to clean the grout. Rinse well with a clean cloth/sponge when finished. 

Pool Service Phoenix

Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including repairs, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs.

More Articles About Pool Care

HOW TO KEEP A SMALL POOL CLEAN WITHOUT A FILTER
Written by webtechs

How To Keep A Small Pool Clean Without A Filter

Keeping a small pool clean without a filter can be a difficult task for homeowners. If you are searching for “how to keep a small pool clean without a filter“, this article will help!

Cleaning The Pool Without A Filter

Having a small pool on your property will certainly come with some pros and cons. Smaller pools will mean less cleaning and any maintenance requirements will be finished quickly. Since the smaller pools are generally built within the ground, though, plants and other bugs can become somewhat troublesome.

The presence of insects and plants usually means algae may grow in the area, unfortunately. Consistent cleaning is the only way to prevent algae growth and discourage unwanted agents from the area.

Best Ways To Clean A Small Pool

What are the best ways to perform any cleaning tasks for a small pool without a filter? One suggestion is to invest in electric swimming pool batteries for any cleaning needs. These cleaners will require no filter for use. Even better, no cables, plugs or cables are needed for these maintenance tasks.

Pool covers are a cheap yet effective way to keep the pool as clean as possible. Covers will generally protect against any kind of debris, dust or insects. These covers are also a great choice for homeowners with young children and/or pets. Purchasing a sturdy pool cover will help you breathe easy, knowing your children are safe from falling in accidentally.

Covers are vital in a place like Arizona. This will help maintain a pool’s temperature during the hot summers. Using a cover in the winter will simply help preserve the water during the cooler seasons.

Cleaning Chemicals

Chemicals are much better options than trying to clean your pool with covers, nets and soap. Common household chemicals, such as rubbing alcohol, baking soda and white vinegar can be used for these tasks. 60 percent alcohol has been proven to remove any sort of sticky gunk from the pool area. Vitamin C can also be used as a stain remover. Baking soda can be used to maintain the pool’s alkalinity.

The most common chemicals are used by your pool care professionals. Chlorine, borax and algaecide are three usual chemicals used for maintenance purposes. Chlorine will kill all sorts of agents in the pool, with algaecide needed if issues persist.

Chemicals To Use For Small Pools

  • Chlorine
  • Algaecide
  • Borax
  • White Vinegar
  • Vitamin C
  • Rubbing Alcohol
  • Baking Soda

How Much Does A Pool Cleaning Service Cost?

The average pool service costs in the Phoenix, AZ area range from $85 to $125 per month. Typically, any pool owner can expect to pay around $105 per month for cleaning services. Use this post to help determine a budget for any upcoming pool services you may need in the future.

How Much Does Pool Service Cost in Phoenix Arizona

Pool Service Phoenix

Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including repairs, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs.

More Articles About Pool Care

1 2