Brian B, Author at Pool Service Gilbert

Regular Post

Written by Brian B

7 July 2021

How To Clean Pool Tile

If you are searching “how to clean pool tile” for your backyard pool, then Pool Service Gilbert is here to help!

Pool Tile Cleaning

Dirty pool tiles covered in calcium will make your pool unsightly. Here are a few of the best cleaning methods to use for your pool tiles:

Pressure Washer
Vinegar
Baking Soda
Pumice Stone
Tile Grout

How To Clean Pool Tile With A Pressure Washer

You can use a pressure washer to clean your pool tile, but you must make sure you are using the right media to blast away the calcium. First, find out what kind of tile your pool features, then you’ll know what type of media to use for the task. It is possible to crack or even ruin your tiles when using the wrong media. Re-tiling your pool is much more expensive than cleaning with a pressure washer.

How To Clean Pool Tile Using Vinegar

Using vinegar is a great way to remove any calcium deposits from your tiles. However, the one drawback to using vinegar is this process can take longer than other cleaning methods. Begin the process by heating a towel/rag in the microwave before applying vinegar. Molecules in the vinegar will react with calcium, which slowly separates the deposition of calcium from the pool tiles.

How To Clean Pool Tile With Baking Soda

When using baking soda to create a paste mixing a proper amount of baking soda and water, you can remove stains in your pool. With a sponge or cloth, spread the paste on the pool tiles. Put the mixture in a spray bottle and distribute the mixture this way, if preferred. Then rinse the mixture off the tiles with a clean cloth/sponge and warm water.

How To Clean Pool Tile With Pumice Stone

A pumice stick can work wonders to scrub off the last few bits of calcium in areas that a scraper can’t reach. Always test the pumice on a low key area of the tile first, although it is generally safe to use this for cleaning.

How To Clean Pool Tile Grout

Mixing baking soda with water will make a paste that can clean your pool tile grout. Get a cloth/sponge wet with warm water and then use the paste for cleaning. If needed, use a toothbrush to get between tiles to clean the grout. Rinse well with a clean cloth/sponge when finished.

Pool Service Phoenix

Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including repairs, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs.

How Much Does A Pool Cost In Arizona?

The average price to install an inground pool in Arizona is $20,656. Costs will range from $10,863-$31,241 in Phoenix, AZ, according to Homeadvisor.

However, there are several different factors that could influence overall costs.

How Much Does A Pool Cost?

Inground pools will generally cost more to install than an above-ground pool. Above-ground models will cost anywhere from $700-$3,600. Custom pools will, of course, cost more than any other models, with prices going upwards of $100,000. Always compare quotes from local pool suppliers to receive the best deal possible.

Pool Cost Factors

The first factor that could inflate the bottom line is exactly how much it will cost for construction of the pool area. That very much depends on the type of material the installers are working with. For instance, fiberglass will cost between $20,000-$37,000, while concrete construction costs anywhere from $35,000-$65,000.

Building an above-ground pool can be considerably cheaper than an inground model. The building of the above-ground pool will run between $1,500-$15,000. The above ground pools will not add the same value to your home as an inground pool will, though. Plus most homeowners prefer the look of inground pools.

Perhaps you are still thinking about whether you should invest in a lap or endless pool. With labor costs, lap pools run between $40,000-$60,000. Endless pools tend to be much shorter than lap pools, and cost approximately $23,000-$40,000.

Inground Pool Costs In Arizona

Total costs for inground pools will very much depend on materials used for construction. These are typical prices based on material:

Concrete: $50,000-$100,000
Vinyl Liner: $25,000-$65,000
Fiberglass: $40,000-$85,000

Saltwater Vs Chlorine Pool Costs

Saltwater pools come with heavy upfront costs, including the installation of a saltwater generator. This costs between $400-$1,800. Installation fees could tack on an additional $400. Yearly salt and chemical costs could total $100. Meanwhile, chlorine pools could require up to $800 per year in chemical costs.

Pool Costs By Location

Are you looking to compare pool costs in Phoenix, Arizona to other big cities in the country? Here are a few average costs:

Miami, Florida: $17,550-$38,600
Dallas, Texas: $12,000-$28,200
New York, New York: $17,000-$33,700
San Diego, California: $15,300-$36,900
Las Vegas, Nevada: $22,300-$135,000

All average costs are according to Home Advisor.

How Much Does A Pool Cleaning Service Cost?

The average pool service costs in the Phoenix, AZ area range from $85 to $125 per month. Typically, any pool owner can expect to pay around $105 per month for cleaning services. Use this post to help determine a budget for any upcoming pool services you may need in the future.

Pool Service Phoenix

How To Acid Wash A Pool

Acid washing can be a necessary part of owning a pool. This is a cleansing process that is performed on a plaster tool or pebble tec to remove a thin layer from the surface. This layer often contains unwanted calcium deposits and other troublesome stains. Here is a step-by-step guide on how to acid wash your pool.

Acid Washing Steps

Here is a quick list of steps to acid washing a pool:

Drain your pool completely.
Combine 1 gallon of Muriatic acid with 1 gallon of water in a bucket.
Completely saturate one pool wall with a hose.
Pour acid mixture on the pool wall (top to bottom) in 10-foot parts, leaving acid on the plaster for 30 seconds.
Rinse this section quickly and thoroughly.
Neutralize the pool area by using soda ash.

First and foremost, make sure you are protected before you begin acid washing the pool. You are working with chemicals here, so wear the proper clothing, which should include a mask, goggles, boots and gloves. Begin the process by completely draining your pool, cleaning up any leftover debris from the surface, if needed. Once your protective gear is on and pool is clear, it’s time to mix up your combination of acid and water. The acid needs to be added to the water; never the other way around.

When saturating one of the pool walls, be sure the hose you are using does not have a nozzle on it. The water needs to be flowing constantly during this step. Pour your mixture in 10-foot segments, scrubbing and cleaning the pool surface simultaneously. Be sure to completely rinse the area that you just acid washed after 25-30 seconds. You want to rinse this quickly to prevent the acid from eating away at the plaster. The acid washing process will generally result in a puddle of residue on the bottom of the pool. This residue needs to be removed as well before it begins to deteriorate the plaster.

Why Acid Wash Your Pool?

Pool owners may still be wondering why acid washing is a necessary evil in the cleaning season. Magnesium or copper stains can cause discoloration in plaster, turning any white coloring to blue. Calcium deposits can also cause discoloration. And many times these deposits and/or stains can not be removing by simply scrubbing the surface. Acid washing is a necessity when you want to completely cleanse your pool of any troubling growths or stains.

How Much Does Acid Washing A Pool Cost?

On average, acid washing a pool costs $202, with a price range of $178-$225, according to Improvenet.com. These prices are based on a pool measuring 500 square feet.

Pool Service Gilbert In Gilbert, AZ

Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including repairs, replacement, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs! Call us at 480-748-3022 for more information.

What Size Sand Filter Do I Need For My Above Ground Pool?

If you are searching for “what size sand filter do I need for my above ground pool,” then this post is for you! The size of the sand filter is very much dependent on pool size and shape. Let’s take a look at how one should go about choosing and cleaning a filter.

What is the Correct Size Pool Filter for My Above Ground Pool?

When deciding on a pool filter for your above ground pool swimming pool, a useful tip is to pick one that is at least 1 sq. ft. for a 10,000-gallon pool capacity.

For instance, a 16” sand filtered system has a 1.55″ sq. ft filtered area, making it ideal for a 15,000- gallon pool.

What Are Recommended Pool Pump Sized For My Above Ground Swimming Pool?

Round above ground swimming pools:

Swimming pools up to 24 ft. around, a 1 horsepower pool pump is needed.
Swimming pools over 24 ft. around, a 1.5 horsepower pool pump is needed.

Oval above ground swimming pools:

Oval swimming pools up to 15 × 30 ft., a 1 horsepower pool pump is needed.
Oval swimming pools over 15 × 30 ft., a 1.5 horsepower pool pump is needed.

Cleaning Your Sand Filter

1. Preparing to Backwash

Check your pressure gauges.
Turn off the pump (and circuit breaker switched off.
Change the setting on your pool filter valve.
Position your waste hose.

2. Backwashing the Filter

Run the pump for two minutes.
Watch the sight glass.
Turn the pump back off.

3. Performing a Final Rinse

Switch to the “rinse” setting.
Return to the “filter” setting.
Check your gauges again.

Pool Service Gilbert

Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including filter cleaning, repairs, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs! Call us at 480-748-3022.

Pool Pump Repair Near Me – Gilbert, AZ

Performing regular maintenance on your pool and surrounding areas is necessary for the longevity of your backyard relaxation station. Unfortunately, though, pool owners do report issues with their pumps over time. If you are looking for “pool pump repair near me,” then Pool Service Gilbert has you covered!

Signs A Pool Pump Has Gone Bad

Rumbling noises
Grinding sounds
Nearly ten years old
Water leaks
Bubble build-up

There are five obvious signs to look for when it comes to pool pump repairs, listed above. Rumbling noises should be noticed right away. Excessively-vibrating pumps will create sometimes loud and consistent noises. The most common reason for the noise is a pump coming loose or dislodged. Get this issue fixed right away before it becomes a larger problem. The good news for pool owners is this issue won’t require a costly repair.

Grinding sounds can be confused as rumbling at first. But, there is a big difference between these various sounds. Grinding means your pump needs new bearings. Older bearings can lead to motor overheating. Bearings are typically cheap, but replacing them requires opening the pump. This is a task best left to the pool service professionals.

Even a well-maintained and routinely checked pump will wear out over time. These pool pumps can last between 8 to 12 years. However, many pool owners may notice failure at an earlier age. If your pump is getting up their in age, it’s time to start thinking about repairs and/or replacement.

Bubbles in your pool water may seem innocent, but this is not a good sign at all. Bubbles are a clear indication of an air leak in your pump. Dirty water can result from an air leak and can pose numerous health hazards. Have a pool cleaning service check this issue out immediately.

Pool Pump Replacement Cost

Owning a pool involves routing maintenance, comprising of repairing the pool liner, repairing the pool heater, and replacing the pool pump. Your pool pump is a vital component of the pool’s filtration system, and as time goes on, they wear out. On average, higher quality pool pumps should be replaced every 8 to twelve years. If you do it yourself it includes the cost of the replacement pool pump, which could run from $150 to $800 or more subject to the kind of pump. When you hire a professional, the cost includes the cost of labor, that is an added $80 to $200.

Replace the Pump Or Motor?

If the pool pump is somewhat new (ten years old or less) and the exterior of the pump does not show indications of degradation, just replacing the motor could be a good idea. When the pump has some age to it, and the motor replacement parts are exhausting to track down or when the cost of the motor replacement is higher than 75% of the cost of a total pump replacement, total pump replacement is the route you should take. If the pump is still under its warranty, then totally replace the pump. Motor replacement is a lot less expensive than replacing the entire pool pump. Replacing the pump yourself costs somewhere between $25 to $200, whereas hiring a professional could cost an additional $40 to $100.

Pool Pump Repair Service

If you are searching for “pool pump repair service” anywhere in the Phoenix valley, then look no further than Pool Service Gilbert! Since 2004, this company has been providing exceptional customer service to residents all over the valley of the sun. One of the many services includes pool pump and motor repairs.

The professionals at Pool Service Gilbert can repair any pump, regardless of the make or model. This rather inexpensive repair comes with an inspection of the pump or motor ahead of time. Repairing your pump or motor immediately will save pool owners money in the long run. In addition to pumps and motors, Pool Service Gilbert can also repair any seals, gaskets, impellers or electric components in need of service.

Pool Service Gilbert

Acid Wash Pool Cost

Average pool acid wash cost is $202, cost ranges between $178 to $225 for a pool measuring 500 square feet, according to Improvenet.com in the US in 2020. Of course, prices will vary based on location, size of the pool and the time of the year. If you have been searching for “acid wash pool cost” or “how much does it cost to acid wash a pool,” this post will help!

Your gorgeous pool is the highlight of your outdoor living area and the centerpiece for all social gatherings, so the accumulation of algae, calcium deposits and stains are a major concern. Taking on those unyielding stains typically requires an acid wash, a procedure usually carried out by a professional pool cleaner because of the hazardous chemicals used. Prior to you starting to look into hiring a pool professional for the project, take a couple minutes and get yourself familiar about the costs involved.

What Is An Acid Wash For A Pool?

Acid washing can only be performed in pools with either plaster or Pebble Tec surfaces. A professional will be able to take a look at your pool before the cleaning. If he or she determines the plaster is too thin, then the acid wash cannot be completed. The only option at that point is to resurface the pool altogether.

Acid Wash A Pool

Having a pool built is a spectacular way to get more out of your backyard, but pools require routine maintenance to keep the pool water clean and for the prevention the building up of algae and stains. When you neglect your pool for any amount of time, the growth of algae starts to stain the surface of the pool making the water slimy. If the water is stagnant and you are unable to see the bottom, it’s time for the pool to be drained for an acid wash. It may also be a good idea to acid wash a pool if calcium deposits have started discolorations.

When you start to see algae growth or build-up of any kind, it’s time to drain the pool and call the professionals for an acid wash. The algae may appear green, black or even yellow. Regardless of the color, this unwanted agent has no business being in your pool. Invest in a proper and thorough acid wash for your valuable pool.

Acid Washing or Pool Cleaning

Routine pool cleaning doesn’t entail draining the pool. General pool cleaning procedures comprise of:

Scrubbing all sides and bottom of the pool with a pool brush
The removal of leaves/stick and floating refuse using a pool net
Cleaning and/or replacing the pool filter cartridges
Testing the pool’s chemical levels and adjusting as accordingly

Acid washing a pool is a more significant undertaking. Involving completely draining the pool and then utilizing an acid solution to remove a very slim layer of the pool’s surface, which in turn removes any calcium deposits and/or stains.

Acid Washing and Pool Kinds

Acid washing is only appropriate for pools having plaster or PebbleTec surfaces. In addition, pools that have older, thin plaster might not be appropriate, in such cases your only choice is to completely resurface the pool. A professional pool cleaning company can establish if acid washing your pool is the way to go.

Don’t forget that acid washing your pool takes off a thin layer of the pool’s surface, so it shouldn’t be done too often. If you acid wash your pool annually, it increases the recurrence of resurfacing. Try avoiding acid washes when you can by routinely maintaining your pool to decrease the buildup of calcium deposits and algae.

Pool Tile Cleaning

How To Clean Pool Tile With A Pressure Washer

How To Clean Pool Tile Using Vinegar

How To Clean Pool Tile With Baking Soda

How To Clean Pool Tile With Pumice Stone

How To Clean Pool Tile Grout

Pool Service Phoenix

More Articles About Pool Care

How Much Does A Pool Cost?

Pool Cost Factors

Inground Pool Costs In Arizona

Saltwater Vs Chlorine Pool Costs

Pool Costs By Location

How Much Does A Pool Cleaning Service Cost?

Pool Service Phoenix

More Articles About Pool Care

Acid Washing Steps

Why Acid Wash Your Pool?

How Much Does Acid Washing A Pool Cost?

Pool Service Gilbert In Gilbert, AZ

More Articles About Pool Care

What is the Correct Size Pool Filter for My Above Ground Pool?

What Are Recommended Pool Pump Sized For My Above Ground Swimming Pool?

Round above ground swimming pools:

Oval above ground swimming pools:

Cleaning Your Sand Filter

1. Preparing to Backwash

2. Backwashing the Filter

3. Performing a Final Rinse

Pool Service Gilbert

More Articles About Pool Care

Signs A Pool Pump Has Gone Bad

Pool Pump Replacement Cost

Replace the Pump Or Motor?

Pool Pump Repair Service

Pool Service Gilbert

More Articles About Pool Care

What Is An Acid Wash For A Pool?

Acid Wash A Pool

Acid Washing or Pool Cleaning

Acid Washing and Pool Kinds

Pool Acid Washing In Gilbert, AZ

More Articles About Pool Care