Arizona Pools Archives - Pool Service Gilbert

Maintaining A Swimming Pool in Arizona Summers

Regular Post

Written by webtechs

1 June 2025

Maintaining A Swimming Pool in Arizona Summers

Maintaining a swimming pool during the scorching Arizona summer requires consistent care and specific strategies to deal with high temperatures, intense UV rays, and dust. Here’s a practical guide to keep your pool sparkling, safe, and enjoyable all season long.

🌞 Challenges Unique to Arizona Summers

Extreme heat (100°F+ daily)
Evaporation causing water loss
High UV exposure degrading chlorine faster
Monsoon dust storms introducing debris and contaminants
Hard water leading to scale buildup

✅ Weekly Pool Maintenance Checklist

🧪 1. Test and Balance Water Chemistry (2–3x/week)

Chlorine: 2–4 ppm (use stabilized chlorine)
pH: 7.4–7.6
Alkalinity: 80–120 ppm
Calcium hardness: 200–400 ppm (Arizona water is hard!)
Cyanuric acid (stabilizer): 30–50 ppm
Use a test kit or test strips, and adjust as needed with pool chemicals.

💦 2. Manage Water Levels

Check 1–2 times per week.
Water evaporates rapidly in Arizona; maintain mid-skimmer level.
Use auto-fill systems if possible, or top off manually.

🧹 3. Skim, Brush, and Vacuum

Skim surface daily to remove leaves, bugs, and dust.
Brush walls and steps weekly to prevent algae.
Vacuum or use a pool robot at least once a week.

🧼 4. Clean Pool Filter

Cartridge filters: Clean every 2–4 weeks.
Sand filters: Backwash every 2–3 weeks.
DE filters: Backwash and recharge DE powder monthly.
Dust storms clog filters quickly—inspect after every storm.

🔄 5. Run the Pump Long Enough

In summer, run pump 8–12 hours/day to ensure proper circulation and chlorination.
Best time: Early morning or at night to reduce evaporation and power costs.

⚠️ 6. Shock Pool After Heavy Use or Storms

Shock weekly during summer or after:
- A pool party
- A storm
- Signs of algae/cloudy water

🧊 7. Consider a UV or Ozone System

Arizona sun depletes chlorine fast. A UV sanitizer or ozone system helps reduce chlorine demand and boost sanitation.

💡 Extra Arizona Pool Care Tips

Issue	Solution
Algae growth	Maintain chlorine, brush often, keep pool covered when not in use
Scaling	Use a sequestering agent to reduce calcium scaling
Debris from monsoons	Use a leaf net, keep skimmer baskets clean, consider installing a pool cover
Sun damage	Add a pool cover or use chlorine stabilizer (CYA) to protect chlorine from UV breakdown

🛠️ Seasonal Prep (Before/After Summer)

Inspect pool equipment (pump, filter, valves, skimmers)
Check for cracks or leaks
Schedule a professional water test and system tune-up

Is Arizona Summer Time A Good Time For A Swimming Pool Upgrade?

Arizona summer can be a good time to upgrade a swimming pool, but with a few key considerations.

✅ **Why Summer Can Be a Good Time for Pool Upgrades**

☀️ 1. Peak Use = Faster ROI

If you’re planning to upgrade lighting, automation, decking, or features, you’ll get immediate enjoyment during pool season.
Great for resale if you’re listing in late summer or fall.

🏗️ 2. Contractor Availability for Small Upgrades

While full builds may be booked, minor upgrades (tile, equipment replacement, automation, resurfacing) are often more feasible and faster to schedule.

💧 3. Real-Time Testing

You can test out new systems (filters, heaters, lighting, smart controls) under real conditions, ensuring performance before the off-season.

⚠️ Challenges of Summer Pool Upgrades in Arizona

🔥 1. Extreme Heat

Contractors may limit work hours or take longer due to high temps (100°F+).
Concrete, plaster, and decking upgrades must be carefully timed to avoid cracking or rapid curing issues.

🌀 2. Monsoon Season (July–September)

Sudden dust storms and rain can delay work or contaminate freshly poured surfaces or open plumbing.

🧾 3. Higher Demand = Higher Prices

It’s peak swimming season, so demand for pool pros can drive up prices.
Scheduling may be more competitive, especially for high-end work.

💡 What Kinds of Upgrades Work Well in Summer?

Upgrade Type	Suitability for Summer
LED lighting	✅ Quick install, usable right away
Smart pool controls	✅ No disruption, good ROI
New pump/filter	✅ Improves water quality quickly
Tile & coping repair	✅ Small jobs doable in hot weather
Deck resurfacing (e.g., Kool Deck)	⚠️ Time-sensitive but feasible
Full resurfacing (plaster or PebbleTec)	⚠️ Can be done, but timing is key
Structural remodels or re-plumbing	❌ Better suited for off-season (Oct–March)

🧭 Final Advice

If you’re considering an upgrade:

Plan work early in the day or off-peak weeks (before monsoon season in July).
Use licensed Arizona contractors familiar with working in extreme heat.
Get quotes from multiple professionals, and ask about heat-adaptive materials.

Pool Maintenance In Gilbert, AZ

Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including repairs, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs!

Standard Pool Size in Gilbert, AZ

The standard home swimming pool size varies based on space, budget, and intended use (recreation, exercise, or entertaining). Here are common dimensions:

🏊‍♂️ Standard Home Pool Sizes

Type	Common Dimensions (L x W x D)	Purpose
Rectangular Pool	10′ x 20′, 15′ x 30′, or 20′ x 40′	Lap swimming, versatility
Kidney-Shaped Pool	16′ x 32′ or 18′ x 36′	Aesthetic, general use
Plunge Pool	6′ x 10′ to 8′ x 20′	Relaxation, small spaces
Lap Pool	8′ x 40′ or 10′ x 50′	Fitness, swimming laps
Freeform Pool	15′ x 30′ to 20′ x 40′ (varied)	Custom shape, landscaping

💡 Depth Guidelines

Shallow End: 3.5–4 feet
Deep End: 6–8 feet (if diving is allowed, ≥8 ft is safer)

Pool Service Gilbert

Pool Service Gilbert is a family-owned and operated business that has been serving the valley since 2004. We offer reliable and affordable pool services, including cleaning, replacement, repairs, equipment installations and more! Our service area includes Ahwatukee, Chandler, Gilbert, Mesa, Phoenix and Tempe, Arizona. Contact us right here for your upcoming pool service needs!

Average Pool Cost In Arizona 2024

The cost of installing a pool in Arizona can vary widely based on several factors, including the type of pool, size, materials, and additional features. Here’s a general breakdown of average pool costs in Arizona for 2024:

Inground Pools:

Concrete Pools:
- Basic: $50,000 – $70,000
- Mid-range: $70,000 – $100,000
- High-end: $100,000 and up
Fiberglass Pools:
- Basic: $40,000 – $60,000
- Mid-range: $60,000 – $80,000
- High-end: $80,000 and up
Vinyl Liner Pools:
- Basic: $35,000 – $50,000
- Mid-range: $50,000 – $70,000
- High-end: $70,000 and up

Above-Ground Pools:

Basic Kits: $1,500 – $5,000 (installation extra)
Fully Installed: $5,000 – $10,000

Additional Costs:

Excavation and Site Preparation: $5,000 – $15,000
Decking/Patio: $5,000 – $15,000 (depending on materials and size)
Fencing: $1,500 – $10,000
Landscaping: $2,000 – $10,000
Pool Cover: $500 – $5,000 (manual vs. automatic)
Pool Heater: $1,500 – $5,000
Pool Lighting: $700 – $2,000
Water Features (e.g., fountains, waterfalls): $2,000 – $10,000
Automation Systems: $1,500 – $5,000

Maintenance Costs:

Monthly Maintenance: $100 – $200
Annual Maintenance: $1,200 – $2,400
Pool Cleaning Services: $75 – $150 per visit

Factors Influencing Costs:

Type of Pool: Concrete pools are generally more expensive than fiberglass or vinyl liner pools.
Pool Size and Shape: Larger and custom-shaped pools will cost more.
Materials and Features: Higher-end materials and additional features like waterfalls, lighting, and automation systems increase costs.
Labor Costs: These can vary depending on the contractor and local rates.
Permitting and Inspections: These are necessary and can add to the overall cost.
Location: The specific area within Arizona can influence costs due to differences in labor rates and material availability.

Financing Options:

Home Equity Loans/Lines of Credit: Often used to finance pool projects.
Personal Loans: Another option for financing the pool installation.
Manufacturer Financing: Some pool manufacturers offer financing plans.

It’s important to get multiple quotes from reputable pool contractors to understand the full scope and costs of your specific project. Additionally, consider ongoing maintenance costs and potential increases in utility bills when planning your budget.

Pool Service Phoenix

Acid Wash Pool Costs 2024

The cost of acid washing a pool can vary depending on several factors, but here’s a general breakdown:

Average cost: $450, with a range of $250 to $600 [source 1, source 2].
Per square foot: $0.40 to $0.60 per square foot, with an average of $0.50 [source 2]. This price considers the total surface area needing cleaning, including walls and floor.
Do-it-yourself: You can purchase muriatic acid (the main ingredient) and other pool chemicals for less than $100 if you tackle the job yourself [source 3, source 4, source 5]. However, this method requires caution and proper handling of hazardous materials.

Here’s a breakdown of potential costs:

Size of the Pool: The size of your pool is one of the most significant factors influencing the cost of an acid wash. Larger pools require more chemicals, labor, and time to complete the process, which can increase the overall cost.
Condition of the Pool: If your pool has significant staining, algae growth, or scale buildup, it may require more extensive cleaning and treatment during the acid wash process. This can increase the cost compared to pools in better condition.
Professional Service Fees: Hiring a professional pool service company to perform the acid wash will incur labor costs. The rates charged by pool service professionals can vary depending on factors such as the company’s reputation, location, and the complexity of the job. On average, professional acid wash services can range from $200 to $800 or more.
Chemicals and Materials: The cost of the acid wash chemicals and other materials needed for the process will also contribute to the overall cost. This can include muriatic acid, protective equipment for the workers, and other cleaning agents. The amount and type of chemicals required will depend on the size and condition of the pool.
Additional Services: In some cases, additional services may be required before or after the acid wash to ensure the pool is properly cleaned and maintained. This could include draining and refilling the pool, balancing the water chemistry, or performing repairs to the pool surface or equipment. These additional services will add to the overall cost.
Taxes and Fees: Depending on your location, you may need to pay taxes or fees associated with pool maintenance services. Be sure to factor these additional costs into your budget.

Overall, the total cost of an acid wash for a pool can range from a few hundred dollars to over a thousand dollars, depending on the factors mentioned above. It’s essential to consult with a professional pool service company to assess the condition of your pool and provide an accurate cost estimate for the acid wash process.

Pool Service Phoenix

Pool Prices In Arizona (2024)

The average price to install an inground pool in Arizona is $20,656. Costs will range from $10,863-$31,241 in Phoenix, AZ, according to Homeadvisor.

However, there are several different factors that could influence overall costs.

How Much Does A Pool Cost?

Inground pools will generally cost more to install than an above-ground pool. Above-ground models will cost anywhere from $700-$3,600. Custom pools will, of course, cost more than any other models, with prices going upwards of $100,000. Always compare quotes from local pool suppliers to receive the best deal possible.

Pool Cost Factors

The first factor that could inflate the bottom line is exactly how much it will cost for construction of the pool area. That very much depends on the type of material the installers are working with. For instance, fiberglass will cost between $20,000-$37,000, while concrete construction costs anywhere from $35,000-$65,000.

Building an above-ground pool can be considerably cheaper than an inground model. The building of the above-ground pool will run between $1,500-$15,000. The above ground pools will not add the same value to your home as an inground pool will, though. Plus most homeowners prefer the look of inground pools.

Perhaps you are still thinking about whether you should invest in a lap or endless pool. With labor costs, lap pools run between $40,000-$60,000. Endless pools tend to be much shorter than lap pools, and cost approximately $23,000-$40,000.

Inground Pool Costs In Arizona

Total costs for inground pools will very much depend on materials used for construction. These are typical prices based on material:

Concrete: $50,000-$100,000
Vinyl Liner: $25,000-$65,000
Fiberglass: $40,000-$85,000

Saltwater Vs Chlorine Pool Costs

Saltwater pools come with heavy upfront costs, including the installation of a saltwater generator. This costs between $400-$1,800. Installation fees could tack on an additional $400. Yearly salt and chemical costs could total $100. Meanwhile, chlorine pools could require up to $800 per year in chemical costs.

Pool Costs By Location

Are you looking to compare pool costs in Phoenix, Arizona to other big cities in the country? Here are a few average costs:

Miami, Florida: $17,550-$38,600
Dallas, Texas: $12,000-$28,200
New York, New York: $17,000-$33,700
San Diego, California: $15,300-$36,900
Las Vegas, Nevada: $22,300-$135,000

All average costs are according to Home Advisor.

How Much Does A Pool Cleaning Service Cost?

The average pool service costs in the Phoenix, AZ area range from $85 to $125 per month. Typically, any pool owner can expect to pay around $105 per month for cleaning services. Use this post to help determine a budget for any upcoming pool services you may need in the future.

Pool Service Phoenix

What Size Sand Filter Do I Need?

How To Clean Pool Tile With Vinegar

The size of the sand filter you need for your swimming pool depends on several factors, including the pool’s size, flow rate, and the specific requirements of your filtration system. Sand filters are commonly used for residential pools and are available in various sizes. Here’s how to determine the appropriate size for your pool:

Calculate Pool Gallons: First, you need to calculate the total number of gallons of water in your pool. To do this, measure the pool’s length, width, and average depth (or depth at various points) in feet and use the following formula:

Pool Gallons = Length (ft) × Width (ft) × Average Depth (ft) × 7.48

This formula gives you the approximate number of gallons in your pool.
Determine Desired Flow Rate: The flow rate is the rate at which water circulates through the filter. A common guideline is to have a flow rate of 2 gallons per minute (gpm) per 10,000 gallons of pool water. You can calculate the desired flow rate as follows:

Desired Flow Rate (gpm) = (Pool Gallons / 10,000) × 2 gpm

This gives you the flow rate required for your pool.
Choose the Right Sand Filter: Sand filters are rated by their flow rate capacity, typically in gallons per minute (gpm). Choose a sand filter that can handle your calculated flow rate. It’s a good idea to select a filter with a slightly higher flow rate capacity to ensure efficient filtration.
Check the Manufacturer’s Recommendations: Always refer to the manufacturer’s specifications and recommendations for the sand filter you are considering. Manufacturers provide guidance on the filter’s maximum flow rate capacity, which should match or exceed your pool’s calculated flow rate.

Keep in mind that sand filters come in various sizes, so you’ll want to choose one that aligns with the size of your pool and the required flow rate. Additionally, consider the quality and durability of the filter, as well as any specific features that may be important to you, such as ease of maintenance.

If your pool has special features like waterfalls, fountains, or a spa, you may need a larger filter or a multi-speed pump to accommodate the additional flow requirements.

Lastly, for the best results and to ensure proper filtration, it’s essential to maintain and backwash your sand filter regularly as recommended by the manufacturer and based on the water quality and usage of your pool. Proper maintenance will help your filter operate efficiently and keep your pool water clean and clear.

Pool Service Gilbert In Arizona

Average Pool Cost In Arizona 2023

The average price to install an inground pool in Arizona is $20,656 in 2023. Costs will range from $10,863-$31,241 in Phoenix, AZ.

How Much Does A Pool Cost?

Pool Cost Factors

Inground Pool Costs In Arizona

Total costs for inground pools will very much depend on materials used for construction. These are typical prices based on material:

Concrete: $50,000-$100,000
Vinyl Liner: $25,000-$65,000
Fiberglass: $40,000-$85,000

Saltwater Vs Chlorine Pool Costs

Pool Costs By Location

Are you looking to compare pool costs in Phoenix, Arizona to other big cities in the country? Here are a few average costs:

Miami, Florida: $17,550-$38,600
Dallas, Texas: $12,000-$28,200
New York, New York: $17,000-$33,700
San Diego, California: $15,300-$36,900
Las Vegas, Nevada: $22,300-$135,000

All average costs are according to Home Advisor.

How Much Does A Pool Cleaning Service Cost?

Pool Service Phoenix

Acid Wash Pool Costs 2023

Acid washing a swimming pool typically costs between $525 and $1,775 on average, or $0.53 per square foot in the United States in 2023.

The cost of an acid wash for a swimming pool can vary widely depending on several factors, including the size of the pool, the extent of staining or discoloration, the geographic location, and the specific services offered by the pool maintenance or cleaning company. Here are some cost-related considerations for an acid pool wash:

Size of the Pool: The primary factor that influences the cost of an acid wash is the size of the pool. Larger pools will typically require more acid and more labor, which can drive up the cost. Pool professionals often charge per square foot or per linear foot of the pool’s surface area.
Severity of Staining: If your pool has heavy staining, algae growth, or other stubborn discolorations, it may require more extensive and time-consuming acid washing. This can increase the cost compared to a simple surface clean.
Geographic Location: The cost of services, including acid pool washing, can vary significantly depending on your location. In areas with a high cost of living or where specialized services are in high demand, you can expect higher prices.
Additional Services: Some pool maintenance companies may include acid washing as part of a comprehensive pool cleaning and maintenance package, while others may charge separately for this service. The overall cost can depend on what other services are included.
Preparation and Cleanup: The process of acid washing involves draining the pool, applying the acid solution, scrubbing, and then neutralizing and disposing of the acid. The cost may include these preparation and cleanup steps.
Repairs and Replastering: In some cases, acid washing can reveal the need for pool repairs or even re-plastering. These additional services will increase the overall cost.
Frequency: Acid washing is not typically done as part of regular pool maintenance and is usually reserved for more severe cases of staining and discoloration. The frequency with which you require acid washing will affect the overall cost.

How Much Does A Pool Cleaning Service Cost?

Pool Service Phoenix

Average Pool Size Phoenix

The average pool volume can vary widely depending on the size and type of pool. Residential swimming pools come in various shapes and sizes, and their volume is typically measured in gallons or cubic meters. Here are some general guidelines for different types of residential pools:

Small Above-Ground Pools: These pools are typically the smallest and can hold anywhere from 1,000 to 5,000 gallons (3,785 to 18,927 liters) of water. The volume depends on the pool’s dimensions and depth.
Medium-Sized In-Ground Pools: A medium-sized in-ground pool, commonly found in residential settings, can have a volume of 10,000 to 20,000 gallons (37,854 to 75,708 liters). The exact volume depends on the pool’s shape, dimensions, and depth.
Large In-Ground Pools: Larger in-ground pools, often found in larger properties or luxury homes, can hold 25,000 gallons (94,635 liters) or more. Some exceptionally large pools can exceed 50,000 gallons (189,270 liters).

It’s important to note that these are general guidelines, and the actual volume of a pool can vary based on its specific dimensions and depth. To calculate the exact volume of a pool, you can use the following formula:

Volume (in gallons) = Length (in feet) × Width (in feet) × Average Depth (in feet) × 7.48052

Or, if you prefer to use meters:

Volume (in cubic meters) = Length (in meters) × Width (in meters) × Average Depth (in meters)

Remember that the average depth is used in these calculations because most residential pools have a sloped floor, with the deepest part typically in the center. To get an accurate measurement, measure the depth at several points and calculate the average.

If you’re unsure about the volume of your pool or need precise measurements for maintenance or chemical treatments, it’s a good idea to consult with a professional pool technician or use a pool volume calculator designed for this purpose.

Pool Service Gilbert

Average Pool Cost In Arizona 2022

The average price to install an inground pool in Arizona is $20,656 in 2022. Costs will range from $10,863-$31,241 in Phoenix, AZ, according to Homeadvisor.

However, there are several different factors that could influence overall costs.

How Much Does A Pool Cost?

Pool Cost Factors

Inground Pool Costs In Arizona

Total costs for inground pools will very much depend on materials used for construction. These are typical prices based on material:

Concrete: $50,000-$100,000
Vinyl Liner: $25,000-$65,000
Fiberglass: $40,000-$85,000

Saltwater Vs Chlorine Pool Costs

Pool Costs By Location

Are you looking to compare pool costs in Phoenix, Arizona to other big cities in the country? Here are a few average costs:

Miami, Florida: $17,550-$38,600
Dallas, Texas: $12,000-$28,200
New York, New York: $17,000-$33,700
San Diego, California: $15,300-$36,900
Las Vegas, Nevada: $22,300-$135,000

All average costs are according to Home Advisor.

🌞 Challenges Unique to Arizona Summers

✅ Weekly Pool Maintenance Checklist

🧪 1. Test and Balance Water Chemistry (2–3x/week)

💦 2. Manage Water Levels

🧹 3. Skim, Brush, and Vacuum

🧼 4. Clean Pool Filter

🔄 5. Run the Pump Long Enough

⚠️ 6. Shock Pool After Heavy Use or Storms

🧊 7. Consider a UV or Ozone System

💡 Extra Arizona Pool Care Tips

🛠️ Seasonal Prep (Before/After Summer)

Is Arizona Summer Time A Good Time For A Swimming Pool Upgrade?

✅ Why Summer Can Be a Good Time for Pool Upgrades

☀️ 1. Peak Use = Faster ROI

🏗️ 2. Contractor Availability for Small Upgrades

💧 3. Real-Time Testing

⚠️ Challenges of Summer Pool Upgrades in Arizona

🔥 1. Extreme Heat

🌀 2. Monsoon Season (July–September)

🧾 3. Higher Demand = Higher Prices

💡 What Kinds of Upgrades Work Well in Summer?

🧭 Final Advice

Pool Maintenance In Gilbert, AZ

More Articles About Pool Care

🏊‍♂️ Standard Home Pool Sizes

💡 Depth Guidelines

Pool Service Gilbert

More Articles About Pool Care

Inground Pools:

Above-Ground Pools:

Additional Costs:

Maintenance Costs:

Factors Influencing Costs:

Financing Options:

Pool Service Phoenix

More Articles About Pool Care

Here’s a breakdown of potential costs:

Pool Service Phoenix

More Articles About Pool Care

How Much Does A Pool Cost?

Pool Cost Factors

Inground Pool Costs In Arizona

Saltwater Vs Chlorine Pool Costs

Pool Costs By Location

How Much Does A Pool Cleaning Service Cost?

Pool Service Phoenix

More Articles About Pool Care

Pool Service Gilbert In Arizona

More Articles About Pool Care

How Much Does A Pool Cost?

Pool Cost Factors

Inground Pool Costs In Arizona

Saltwater Vs Chlorine Pool Costs

Pool Costs By Location

How Much Does A Pool Cleaning Service Cost?

Pool Service Phoenix

More Articles About Pool Care

How Much Does A Pool Cleaning Service Cost?

Pool Service Phoenix

More Articles About Pool Care

Pool Service Gilbert

More Articles About Pool Care

How Much Does A Pool Cost?

Pool Cost Factors

Inground Pool Costs In Arizona

Saltwater Vs Chlorine Pool Costs

Pool Costs By Location

How Much Does A Pool Cleaning Service Cost?

Pool Service Phoenix

More Articles About Pool Care

✅ **Why Summer Can Be a Good Time for Pool Upgrades**